Cast iron gate valve UG-Gw/Gz Dn25-50

Gate valves with soft sealed wedges with threaded ends are designed to close and open the flow of clean liquids, including clean drinking water, non-aggressive sewage, free of solid contamination, at the maximum temperature of medium up to 70°C and the nominal pressure up to 10 bar for valves PN10 and 16 bar for valves PN16. Closing of the gate valve proceeds by turning the stem in the clockwise direction. On the Purchaser’s request, the anticlockwise closing is also available. All the gate valves specified in this leaflet may be installed into horizontal
or vertical pipelines.

Execution according to: PN-EN 1171, PN-EN 1074-1
Face To Face Dimensions: series 14 according to PN-EN 558
Thread acc. to: PN-EN ISO 228-1
Protective coating: powder epoxy coating RAL 5015
Coating thickness: 250 µm or acc. to buyer's reguest